← Back to dnsafe.co
System status Help Center
Home / Guides / Router & device setup / Google Nest Wifi

Change DNS on Google Nest Wifi.

Protect every phone, tablet, laptop and TV on your Nest Wifi with one setting in the Google Home app.

Router & device setup · Updated October 30, 2026 · 4 min read

TimeAbout 5 minutes
You needThe Google Home app
Works onNest Wifi, Nest Wifi Pro, Google Wifi
ProtectsEvery device on your home Wi-Fi
In shortCreate a free DNSAFE account and register your home connection, then in the Google Home app go to Wi-Fi›Network settings›Advanced Networking›DNS, choose Custom, enter DNSAFE's two addresses and tap Save.

Before you start

  1. Make a free DNSAFE account at my.dnsafe.net. No card needed.
  2. Register your home connection. In the app, go to Devices›Add a home connection. Your home's internet address is filled in for you. DNSAFE uses it to know the lookups are yours, so do this from home.
  3. Keep these two addresses handy. They're the same for every brand of router.
    Your DNSAFE addresses
    Primary DNS3.12.124.91
    Secondary DNS3.11.62.44

    Use both DNSAFE addresses. Don't put your internet provider's DNS in the second box: lookups that go there aren't filtered.

Change DNS on your Google Nest Wifi

  1. Open the Google Home app on a phone signed in to the account that set up your Wi-Fi.
  2. Open the DNS settings. Tap Wi-Fi›Network settings›Advanced Networking›DNS. (In older versions of the app: Wi-Fi›Settings›Advanced networking›DNS.)
  3. Enter DNSAFE. Choose Custom and enter your Primary and Secondary addresses from the box above in the IPv4 boxes. Leave the IPv6 boxes empty. Tap Save.
  4. That's it. Nest Wifi applies it straight away; no restart needed.

Menu names can change with firmware updates. If yours look different, the maker's own page is linked under Sources.

Check it worked

  1. Open blocktest.dnsafe.net on any device on your Wi-Fi. You should see the DNSAFE block page. That means filtering is on.
  2. Or run the DNS leak test. It should show DNSAFE answering your lookups.
  3. Still seeing the normal page? Turn Wi-Fi off and on again on that device (it keeps the old settings for a while), then try again.

Stop IPv6 DNS from skipping DNSAFE

Many internet providers give homes IPv6 as well as IPv4. Your router can then hand devices a second DNS server, your provider's IPv6 one, and phones and laptops may use it instead of DNSAFE. Lookups that go there aren't filtered. Do this if the protection test says Partly protected, or the block test works on some devices and not others.

  1. Turn IPv6 off. In the Google Home app, tap Wi-Fi›Network settings›Advanced Networking, turn IPv6 off and tap Save.

Smart-home gear that uses Thread or Matter relies on IPv6 inside your home. If anything stops responding after this, turn IPv6 back on and use DNS IDs on your phones and computers instead.

Then turn Wi-Fi off and on on your phone and run the protection test. It should say Protected. Browsing, streaming and gaming keep working over IPv4. If you'd rather keep IPv6, protect each phone and computer with its own DNS ID instead: in the DNSAFE app, add the device. DNS IDs send every lookup to DNSAFE.

Not set up yet? DNSAFE Home is free: block malware, scams and adult sites on every device.

Start free

If something's not right

Websites stopped loading after the change

DNSAFE doesn't recognise your home's internet address yet. Open my.dnsafe.net from home: it will offer to use the new address. Internet providers change it from time to time; here's how to keep it up to date automatically.

Some devices aren't filtered

Your internet provider's IPv6 DNS is the usual reason: see Stop IPv6 DNS from skipping DNSAFE. A device with its own DNS setting, a browser with “secure DNS” turned on, or a VPN can also go around your router: see how to stop DNS filtering bypass, or set DNSAFE up on that device too.

Nothing loads after saving

Google warns that a DNS that doesn't answer stops every device going online. Check both addresses are typed exactly, and that your home connection is registered in DNSAFE. To go back, choose Automatic in the same screen.

My internet provider's router is in front of this one

Change DNS on the router your devices connect to. If your devices connect to the provider's router instead, change it there: see the guides for Xfinity, Spectrum, AT&T and Verizon Fios.

Frequently asked questions

Does changing DNS slow down my internet?

Usually not. DNSAFE answers from the region nearest you. Pages load the same; blocked sites just don't open.

Will this affect gaming or streaming?

No. DNS only looks up where a name points. Games and video play as before; only the categories you choose to block are stopped.

Can I undo it?

Yes. In the same DNS screen, choose Automatic and tap Save.

Do I still need antivirus?

Yes. DNS filtering stops bad sites before they load, but it doesn't scan files already on a device. Use both.

Sources

Related guides

For business

How to stop devices bypassing DNS filtering

Close the DoH, DoT, iCloud Private Relay, VPN, hard-coded DNS and IPv6 DNS routes.

Router & device setup

Change DNS on a TP-Link router

Archer routers, Deco mesh and DSL modem routers, step by step.

Router & device setup

Change DNS on a Linksys router

Velop mesh (Linksys app) and Smart Wi-Fi routers, step by step.

A safer internet for everyone at home.

Free to start. Set up in about 3 minutes.

Start free → How DNSAFE Home works